Heat Shrink Termination Kit for Low Voltage Single Core Cable (XLPE / PVC / FRLS)

A Heat Shrink Termination Kit is a complete and reliable solution designed to provide safe, moisture-sealed, and long-lasting terminations for low voltage single-core power cables ranging from 0.6 kV to 3.3 kV. These kits are widely used in industrial, commercial, and utility electrical installations where performance and safety are critical.

Safe Connect Low Voltage Heat Shrink Termination Kits are manufactured using premium cross-linked polyolefin materials with adhesive lining to ensure excellent insulation, mechanical strength, and environmental protection.

​

Product Overview

Heat shrink termination kits shrink uniformly when heat is applied, forming a tight seal over the cable insulation. This creates a waterproof, corrosion-resistant, and electrically stable termination that protects cables from dust, moisture, UV radiation, and chemicals.

These kits are suitable for XLPE, PVC, and FRLS insulated single-core cables.

​

Key Features & Benefits

• High electrical insulation strength
• Moisture-proof and weather-resistant design
• UV and temperature resistant material
• Corrosion protection for long service life
• Easy and quick installation
• Immediate energisation after fitting
• Suitable for indoor and outdoor use
• Complies with IS, IEC and international standards

 

Applications

Low Voltage Heat Shrink Termination Kits are used in:

• Power distribution panels
• Transformers and switchgear
• Distribution poles
• Industrial electrical networks
• Commercial buildings
• Underground and outdoor cable installations

 

Why Choose Safe Connect Heat Shrink Termination Kits

Safe Connect provides high-quality power cable accessories engineered for durability and electrical safety. Our termination kits offer:

• Consistent electrical performance
• Reduced risk of insulation failure
• Strong mechanical protection
• Long-term reliability in harsh environments
• Cost-effective installation solution

 

How to Select the Right Termination Kit

Before selecting a kit, ensure:

• Cable insulation type (XLPE / PVC / FRLS)
• Conductor size and voltage rating
• Required shrink ratio
• Compliance with applicable standards

Choosing the correct kit ensures maximum safety and performance.

 

Installation Guidelines

For best results:

• Clean the cable insulation properly
• Use a professional heat gun (avoid open flames)
• Heat evenly to prevent cold spots
• Ensure full shrinkage before energising
• Inspect the termination after installation

 

Common Installation Mistakes to Avoid

• Selecting incorrect tubing size
• Poor cable surface preparation
• Uneven heating
• Using improper heat sources
• Skipping final inspection